Campagnolo Shamal Ultra Wheelset

As in the 2-Way Fit(TM) version, the Shamal(TM) Ultra(TM) wheels for tubular or clincher, roll to the starting line with the best performance ever. MegaG3(TM) and the oversized flange make this wheel extremely quick off the line and reactive, featuring a full 17% increase in reactivity over the previous version!

This incredible improvement in performance, along with the extreme smoothness of the ceramic ball bearings, will enable you to transfer all the power of your pedal stroke when accelerating on level ground as well as in explosive sprints or a climb

TOROIDAL MILLING7 : Reduces the peripheral weight of the rim - makes the wheel extremely reactive

MOMAG(TM): Allows the external profile of the rim to be free of holes, increases structural resistance, makes rim tape unnecessary and reduces the weight of the wheel

DYNAMIC BALANCE(TM): Every point of the rim is counter-balanced by an equal weight on the opposite side. Maximum stability of the wheel even at high speeds

DIFFERENTIATED RIM HEIGHT: 26mm at the front to provide optimal handling; 30mm at the rear for transmitting all your power to the wheel

SPOKES ANTI-ROTATION SYSTEM: Keeps the spokes in the position of maximum aerodynamic penetration

AERO SPOKES IN ALUMINIUM: Maximum aerodynamic penetration - lower weight and greater reactivity

ALUMINIUM NIPPLES: Reduces the peripheral mass of the wheel - increases reactivity

CARBON FIBRE HUB BODY: High degree of lateral stiffness - reduces the weight to the minimum

OVERSIZED FLANGE: Increases the torsional stiffness, increasing reactivity at each change of pace of the cyclist

ALUMINIUM AXLE: Reduces the weight of the wheel

QUICK RELEASE: Steel spine and eccentric, lever with drill lightening and aluminium die. Eccentric-closure system allows cyclist to modulate the pressure necessary for heightened sensitivity to find the proper closure for the block. Easy to use, with a material resistant to wear and tear, rust, and pressure

Occasionally, without notice, manufacturers change product design and/or specifications.