specialized giant cube cannondale felt-bikes shimano endura altura
From £75.99
Save up to 20% RRP: £95.00
3 reviews
Add to Basket
  • Description
  • Reviews (3)
  • Bottom Brackets Guide
  • Delivery
  • Returns & Warranty
  • Product description

    Press-Fit PF41 Bottom Bracket

    Our press-fit bottom brackets feature high quality sealed cartridge bearings, giving a solution to the press-fit bottom bracket minefield

    Key Features

    • PF bottom brackets are designed to fit bikes with a threadless bottom bracket cup
    • The bearing cups thread into a centre tube to give a very secure, safe fit (24mm axle version only)
    • Choice of stainless or ceramic cartridge bearings
    • Ability to convert the bottom bracket to fit Truvativ GXP cranks with a simple shim adaptor
    • Specific fitting tool required - purchased seperately

    Tech Specs

    • Options to suit either 24mm or 30mm crank axles
    • 24mm crank axle versions available to suit BB92, BB89.5, BB86.5 and 100mm bottom bracket width for Fat bikes
    • 30mm crank axle version available to suit 89.5, 92, 104.5, 107 and 121mm bottom bracket widths
    • Available with replaceable stainless or ceramic bearings for less friction and greater durability
    • Truvativ conversion kit available separately
    • Cups pressed in and held in place by a screw-in centre tube to prevent slipping and play ***note: No centre tube on 30mm axle option***
    • Easy to service and replaceable parts
    • Weight from: 112g
    Press-Fit PF46 Bottom Bracket

    Our press-fit bottom brackets feature high quality sealed cartridge bearings, providing a solution to the press-fit bottom bracket minefield

    Key Features

    • PF bottom brackets are designed to fit bikes with a threadless bottom bracket cup
    • The bearing cups thread into a centre tube to give a very secure, safe fit
    • Stainless steel cartridge bearings
    • Specific fitting tool required - purchased seperately

    Tech Specs

    • Options to suit 68mm, 73mm, 83mm and 100mm bottom bracket shell widths
    • Available to fit 24mm and 30mm crank axles
    • Available with replaceable stainless or ceramic bearings for less friction and greater durability
    • Truvativ conversion kit available separately
    • Cups pressed in and held in place by a screw-in centre tube to prevent slipping and play
    • Easy to service and replaceable parts
    • Weight from: 112g

  • Hope Press Fit Stainless Steel Bottom Bracket Reviews

    Write your own review
    Overall Rating:
    4.9
    out of 5
    4.89
    Build Quality
    5.00
    Performance
    5
    Value For Money
    4.67

    Customer Reviews (3)

    5
    Beautiful Engineering

    I have a Hope threaded BB on another bike and after 20K miles it is still going strong. The press fit version for my new build seems even better engineered and certainly superior to the Shimano versions I looked at. I look forward to 20K + on this. Expensive, yes, but if it lasts this long it is good value.

    I have a Hope threaded BB on another bike and after 20K miles it is still going strong. The press fit version for my new build seems even better engineered and certainly superior to the Shimano versions I looked at. I look forward to 20K + on this. Expensive, yes, but if it lasts this long it is good value.

    Close review
    4.7 out of 5
    Build Quality: 5/5
    Performance: 5/5
    Value For Money: 4/5
    5
    Perfect replacement

    Needed a replacement for my Sram PF30 bearings, but because Sram glue the bearings in the plastic cups you need the complete kit. The Hope kit includes stainless cups and the quality bearings are press fitted, so you only have to replace the bearings saving money in the long run. My local bike shop fitted mine for £15 as they had the special tool.

    Needed a replacement for my Sram PF30 bearings, but because Sram glue the bearings in the plastic cups you need the complete kit. The Hope kit includes stainless cups and the quality bearings are press fitted, so you only have to replace the bearings saving money in the long run. My local bike shop fitted mine for £15 as they had the special tool.

    Close review
    5 out of 5
    Build Quality: 5/5
    Performance: 5/5
    Value For Money: 5/5
    5
    Super Smooth

    Wow just fitted the Hope PF46 stainless steel bottom bracket kit, replacing the Sram PF30 nylon kit because one of the bearings had seized. I didn't think i'd notice the difference but it's chalk n cheese well worth the extra few quid.

    Wow just fitted the Hope PF46 stainless steel bottom bracket kit, replacing the Sram PF30 nylon kit because one of the bearings had seized. I didn't think i'd notice the difference but it's chalk n cheese well worth the extra few quid.

    Close review
    5 out of 5
    Build Quality: 5/5
    Performance: 5/5
    Value For Money: 5/5