Mavic R-Sys SL Front Road Wheel

1295g ! R-Sys technology and performance in the lightest clincher alloy wheelset available

Only exclusive Mavic technologies could make this wheel possible. Low inertia, lightweight and responsiveness reach their maximum. All this with no compromise on reliability. The perfect wheel for the most demanding climbers
Key Benefits

• The lightest rim: ISM3D Light components: carbon hubs, superlight bearings and axles
  
  
• High energy transfer: Tracomp technology The lowest inertia for the same stiffness: ISM3D
  
  
• Weight 545 grams
  SUP
  Soudé Usiné Process. After bending, the rim joint is arc welded. The welded seam is then milled for a smooth finish. A welded and milled rim joint is extremely strong, eliminates shuddering when braking, and offers superior wheel balance
  
  UB Control
  Usiné Brut Control. The braking surfaces are milled to improve braking friction and eliminate shuddering
  
  Maxtal
  Exclusive to Mavic. An aluminum alloy that is 30% more resistant than a 6106 alloy, for lighter and stronger rims
  
  Fore
  Only one of the 2 rim wall is drilled : - the rim is 4 times more resistant to fatigue stress - 20% increase in the rim rigidity to transfer all of your energy to the ground
  
  QRM SL
  Qualité de Roulements Mavic Super Light. The super light bearings are designed having in mind the QRM strict specifications. The matching hub axles are machined within extremely narrow tolerances, then one by one adjusted with very high precision when assembled. As a result, QRMSL hubs are up to 12% lighter that QRM+ ones
  
  Zicral
  A highly resistant and and lightweight aluminum alloy for spokes
  
  FTS-L
  FTS-L: Force Transfer System Light. Reinforcement of key transmission components: the contact area between the pawl and the hub body is reinforced by 2 stainless steel inserts, which allows the use of a 100% aluminum hub body: - the entire hub is extremely lightweight and strong - greater efficiency due to better transmission of efforts on the entire wheel
  
  Tracomp
  Traction Compression. Tracomp carbon fiber spokes works in traction and compression: - under normal loads, wheel deflection is limited by the very high traction resistance of carbon fibers. - uder greater loads, where a normal wheel would flex more because of one of its spoke loosening, Tracomp spokes enter into compression and keep supporting the rim, preventing any further wheel deflection
  
  ISM3D
  Inter Spoke Milling 3 Dimension. ISM3D pushes the envelope of ISM one step further by not only machining the lower bridge of the rim between each spoke holes, but also its sidewalls. Machined sidewalls save even more weight and inertia to boost your acceleration and enhance climbing performance

Occasionally, without notice, manufacturers change product design and/or specifications.