The Cube Stereo 150 HPA Race 27.5+ 2016 Features are:Frame
We don't follow the crowd at CUBE. Only when we're convinced that a new trend has proved its worth, do we develop our own take on it. The Stereo 150 HPA Race 27.5+ is a perfect example. Building on the foundation of wide, grippy 27.5+ wheels, we kitted this new frame concept out with a complete set of CUBE components to make an unbeatable all-mountain / enduro bike. Limits? What limits?
We know how to build a light but stiff aluminium chassis. The Stereo 150's 27.5+ compatible chassis is no exception. With the special, extra wide tyres and Agile Trail Geometry (ATG), you're guaranteed an incredible combination of agility and safe handling. Efficient Trail Control (ETC) suspension design makes a chassis that practically defies the laws of physics - efficient uphill, but blisteringly quick and stable downhill too. Internally routed gear cables, the compact Trail Motion Rocker linkage and a deep section top tube all contribute to the modern, clean looks.
The Stereo 150 HPA Race 27.5+ likes everything a little bit larger. That's why the Rock Shox suspension components are equipped with enduro class technologies - a YARI RC fork with 150mm travel and 110x15mm Boost axle up front, and the potent Monarch RT3 air shock at the rear. Nobby Nic tyres - all 3.0inch width of them - and CSW B+ 3.7 wheels with 40mm rims work together to give this bike its exceptional trail manners. In terms of traction and all-round fun, nothing else comes close. Sram's GX group gives the transmission, supplemented by a Race Face Turbine Cinch chainset with direct mount chainring. The Sram R hydraulic brake set brings everything safely to a halt, thanks to its 4 piston calipers.
Efficient Trail Control
Our Efficient Trail Control series works so that everyone can have more fun on the trail. With 27.5 and 29er wheel options our frames cover the widest range of riding on every terrain you can imagine. The low leverage ratio and linear rate curve makes the bike very sensitive, avoids bobbing and offers full usable travel all the time. Steep seat tube angles and slack head tube angles make these dream machines ready for action on the descent where you can use the full amount of travel to be on the safe side.
The key requirement is for continuously active and fully usable travel, with the rear triangle unaffected by pedalling or especially braking forces. There are a number of ways of achieving this ? CUBE favours a four bar design with a chainstay pivot. Here, one of the pivots is located between the dropout and the chainstay, ensuring that braking does not have a negative effect on the movement of the rear wheel. By carefully positioning the remaining pivots, we obtain the finest riding qualities for our full suspension bikes both uphill and downhill. This fact is proven by many top test results in leading magazines over the last few years.
Integrated Post Mount
The post mount rear brake system is found on all carbon fiber frames and top aluminum full suspension models. Two bolts and the IS adpater aren?t needed anymore, and fewer parts means less weight. In this case we save 30 grams. This may not sound a lot. But there's potential to save weight in every detail.
Dropper seat posts are getting more and more widespread, but to integrate them optimally in the frame, they have to be factory fitted. With the Stealth Ready frames, it is possible to build in a dropper seat post with internally routed cables, which besides the clean look, helps prevent any cables getting jammed. The exit of the cable on the frame ? if not required ? will be sealed with a cover for protection.
Trail Motion Rocker
The Trail Motion Rocker features optimized leverage ratios for every bike and intended use, giving fast reacting yet stable suspension in every situation. The computer-designed one piece rocker construction gives maximum stiffness for the best suspension performance while still being extremely lightweight.
: HPA Ultralight, Advanced Hydroform, Triple Butted, ETC 4-Link, ISCG Mount, Boost148, AXH Rear Shock
: Rock Shox Monarch RT3, 200x57mm, Open/Pedal/Lockout Mode, LV Air Canister Fork
: Rock Shox Yari RC Solo Air 27.5+, Tapered, Boost 110x15QR Maxle, 150mm Headset
: FSA 1.5E ZS, Tapered, Top Zero-Stack 1 1/8" (OD 44mm), Bottom Zero-Stack 1 1/2" (OD 56mm) Stem
: Race Face Ride, 35mm Speed
: 11 Rear Mech
: Sram GX1, 11-Speed Shifters
: Sram GX Trigger, 11-Speed Chainset
: Race Face Turbine 30T Boost, 175mmFront Brake
: Sram Guide R, Hydr. Disc Brake 180mm Rear Brake
: Sram Guide R, Hydr. Disc Brake 180mm Rims
: DT CSW B+ 3.7 Straightpull Wheelset, 28/28 Spokes, Boost 110x15mm/Boost148 X12, 40mm Tubeless Ready Front Hub
: Boost 110x15mm Rear Hub
: Boost148 X12 Tyres
: Schwalbe Nobby Nic Kevlar 3.00, TrailStar, Tubeless Easy Front Schwalbe Nobby Nic Kevlar 3.00, PaceStar, Tubeless Easy RearSeatpost
: Cube 120mm Adjustable Seatpost, Handlebar Lever, Internal Cable Routing, 31.6mm