Mavic Ksyrium Pro Exalith Road Rear Wheel

All the best features of the Ksyrium Pro with the added benefit of our exclusive Exalith rim surface treatment. This wheel system delivers incredible versatility and all-rounder capabilities plus stunning looks and braking performance.

Exalith is a special chemical treatment that penetrates deep within the aluminum rim material for multiple benefits. First, the rim is reinforced, notably at the brake track, so there’s very low wear over time. Braking power is greatly improved, reducing stopping distances by up to 20% compared to traditional aluminum rims, in both dry and wet conditions. Specific Exalith brake pads ensure quiet braking and limited wear. The rim has a stunning all-black finish that lasts for thousands of kilometers.

We use Fore drilling to keep the rim light and strong, plus Zicral spokes that are stiffer and lighter than traditional steel spokes. Isopulse lacing improves stability and stiffness under high loads, and a new wider rim (17mm internal width) features ISM 4D technology (Inter Spoke Milling) to further reduce weight to just 405g. Excess material is removed from the lower bridge and sidewalls, so the rim is super light but still strong.

Matching Yksion Pro tires, specifically designed for front and rear use, offer an ideal balance of efficiency, grip and light weight. Made with a supple 127 TPI casing, they weigh only 205g in 25mm. The Ksyrium Pro Exalith system is available with 23mm or 25mm tires.

Key Features:

• Light where it matters with the right aero touch
• ISM 4D rims maintain light weight while improving aerodynamics
• 21mm external width (17mm internal) for improved rolling efficiency and comfort
• Race-ready responsiveness and added control
• Stiff and strong Zicral spokes
• Isopulse lacing front and rear for increased wheel stability
• GripLink front tire for cornering grip, PowerLink rear tire for low rolling resistance
• Better braking performance and rim longevity
• Braking distances proven to be 18% shorter than average in wet or dry conditions
• Reduced rim wear for extra longevity and an all-black look that lasts for thousands of kilometers

Compatibility
Rear axle: Quick Release only
Front axle: Quick Release only
Freewheel: Shimano/Sram, convertible to Campagnolo with optional driver body

Hubs
Axle material: aluminum
Front body: carbon with aluminum flanges
Rear body: aluminum
Adjustable sealed cartridge bearings (QRM+)
Freewheel: FTS-L steel

Compatible Adapters and freewheel bodies
FTS-L Campagnolo freewheel body (L30871200)
FTS-L Shimano / Sram freewheel body (L30871100 - Delivered on the wheel)

Intended Use
Max. Pressure: see indication on wheel and tyre. If they differ, use the lowest of the 2
For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels don't exceed 120kg, bike included
ASTM CATEGORY 2 : road and offroad with jumps less than 15cm
Recommended tyre sizes: 25 to 32 mm

Tyre
Breaker: Front Kevlar, Rear polyamide
Dimension: 25-622 (700x25c)
Yksion Pro GripLink (front) & PowerLink (rear)
Front and Rear Tread: Single Compound
Casing: 127 TPI

Occasionally, without notice, manufacturers change product design and/or specifications.