Nukeproof Reactor 275 Elite SLX 27.5" Mountain Bike 2020 - Trail Full Suspension MTB
Out of Stock Sorry, you missed it. But you still have options...
Recommended alternatives We've found some items that may interest you...
- Show Recommended Products You may also like...
- Show Top Rated Our top rated products...
- Show Best Deals Great products, low prices...
- Show New in Full Suspension MTB See the latest products
New in Full Suspension MTB
Archive Product Details Comparing? Here's the info from the out of stock item
- ShowProduct Information Introducing the all new Nukeproof Reactor: an old school name with a very new school look. Although ... read more
- Show Reviews & Q&As
Introducing the all new Nukeproof Reactor: an old school name with a very new school look. Although it takes its name from the original 1996 Nukeproof Reactor trail frame, a lot has changed in the last 23 years as it runs an all new trail focused platform.
From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.
To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.
Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?
All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.
Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.
Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.
To ensure the bike could climb as well as it descends, we designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.
Occasionally, without notice, manufacturers change product design and/or specifications.
|Frame:||Nukeproof Reactor 275 Carbon, 140mm Travel, UD woven Carbon Fibre front triangle/chain stays/seat stays, internal cable routing, custom tuned rear shock|
|Fork:||Fox 36 Performance - 150mm|
|Rear Shock:||Fox Float DPX2 Performance|
|Headset:||ZS44-28.6 - T2 / ZS56/40 - B8|
|Bars:||Nukeproof Horizon Alloy|
|Front Brake:||200mm Front|
|Rear Brake:||180mm Rear|
|Brake Lever:||SLX- M7100 Lever with M7120 Caliper|
|Rear Mech:||SLX- M7100|
|Shifters:||Shimano SLX M7100-IR, 12-speed Rapidfire Plus, I-Spec EV|
|Rims:||DT SWISS M1900|
|Rear Hub:||Boost 148x12mm|
|Front Tyre:||Maxxis Assegai 2.5WT/Minion DHRII 2.4WT|
|Rear Tyre:||Maxxis Minion DHRII 2.4WT|
|Seat Post:||Brand-X Ascend|
|Chainset:||Shimano SLX M7100 Boost 32T170mm|
|Bottom Bracket:||Threaded 73mm BSA|
|Chain:||Shimano SLX M7100 HG 12-speed Inc Quicklink|
|Pedals:||Basic Resin Flat|