• Any dropper post with a 25mm or 26mm stanchion diameter - when in doubt, measure your stanchion.
• Note that discrete position droppers will likely lose the lowest position because the valais 25 reduces the dropper travel by 25mm
• Valais 25.25 (posts that have a confirmed 25mm diameter)
  • Easton haven
  • Giant contact (internal routing)
  • Raceface turbine
  • Rockshox reverb stealth
  • Specialized command post
  • 9point8 fall line
  • Other 24.75-25.25mm (cable routing dependent)
• · valais 25.26 (posts that have a confirmed 26mm diameter)
  • Thomson covert
  • Fox transfer
  • Other 26-26.5mm (cable routing dependent)
• Valais limits the dropper travel by at least 25mm. There are 2 models as noted in the compatibility section, one for the 25mm diameter stanchions and one for the 26mm stanchions.
• At full compression, the valais' deep skirt contacts the seal collar first and will not contact the seal lip (protecting delicate seals from damage).

  Installation:

• Remove the screw and slide valais over the seatpost stanchion
• Put the valais at the highest position, install the screw and tighten to 2-3 nm
• Install your saddle bag with it as full as it will be on the trail.
• Let all the air out of your frame shock, drop the post, and compress the bike suspension all the way.
• Assure there is adequate tyre to saddlebag clearance. If there is not tyre clearance, raise the dropper, and lower the valais until there is adequate tyre to saddlebag clearance.
• Re-inflate your shock and be sure that the valais is torqued to 2-3 nm

Occasionally, without notice, manufacturers change product design and/or specifications.