Zipp 404 NSW Carbon Clincher Rear Road Wheel
The Zipp 404 NSW Carbon Clincher rear road wheel offers exceptional all-round performance on every ride. Cutting edge hub and rim technology for when only the best is good enough.
Sawtooth crosswind stability:
The 404 NSW offers enhanced crosswind stability thanks to the Sawtooth dimple design. The 12 nodes are optimized to start aero sheering of 50hz at 20mph which has the effect of decreasing the laminar bubble effect on the shielded side of the rim which reduces yaw and drag.
The upshot of this is that keeping on track in a crosswind will require a lot less effort with Zipp 404 NSW.
Extensive wind tunnel testing goes into the design and development of Zipp rims, so you can be sure of their aero credentials.
Unidirectional carbon rims:
Zipp carbon rims achieve a light weight with strength, durability and an unrivalled ride quality. Uni-directional fibres handle all the tensile and compressive loading within the rim, while woven carbon and silica/ceramic fabric sheets handle all compressive braking forces.
Zipp rims are tough too, Carbon Bridge technology incorporates a 6 bundle co-axial Kevlar thread which offers 50% extra impact protection on the edge of the rim.
Consistent & responsive Showstopper braking surface:
The Zipp 404s offer exceptional braking performance thanks to the Showstopper braking surface. This directional moulded in texture features incredibly tough silicon carbide particles, suspended in the surface resin for a consistent surface roughness that won’t wear-out.
With Showstopper, braking is both consistent and responsive in all weather conditions. The 404s are made with heat resistant resin for consistent braking performance on even the very longest descents.
Rear Cognition hub:
The rear Cognition hub offers the very best in Zipp hub technology. Offering frictionless rolling the AxialClutch completely disengages the ratchet when coasting so you can squeeze every bit of speed out of the descents.
Once you start pedalling a magnetic mechanism delivers rapid re-engagement for an immediate response. The star-flanged, straight pull design means that the load is moved away from the bearings for accurate bearing bores and smooth rolling bearings regardless of spoke tension.
New QR Skewer:
Each Zipp 404 wheel is supplied with a newly designed quick-release skewer, with a wider more ergonomic handle that contours neatly with the frame when closed, Tangente Platinum Pro Evo brake pads, integrated valve extender and valve-core spanner.
Ride faster and more efficiently with the rear Zipp 404 NSW carbon road wheel.
Key Features:
- 404 NSW rim with 58mm rim depth for all-around performance
- Sawtooth dimple design for improved performance in crosswinds
- Carbon Bridge™ technology for improved performance under load
- Showstopper™ braking surface for consistent stopping in all conditions
- Cognition for frictionless coasting
- The 404 NSW Carbon Clincher wheel is available with 0% APR finance
Specifications:
- Weight: 850g
- Hub Used: Cognition
- Rim Used: X58NSW
- Rim Depth: 58mm
- Brake Track Width (centre): 26.4mm
- Internal Width: 17.25mm
- Spokes: Sapim® CX-Ray
- Spoke Count: 24
- Spoke Length Non-Drive: 256mm
- Spoke Pattern Non-Drive: 2 Cross
- Spoke Pattern Drive: 2 Cross
- Spoke Length Drive: 258mm
- Max Tire Pressure: 125psi
- Max Tire Pressure: 8.62bars
- 11-speed compatible hub: Yes
- Track Adaptable: No
- Dimpled Surface: ABLC™ SawTooth™ Technology
- Nipples: Sapim® secure-lock alloy
- External Nipples: Yes
- XD Compatible: Yes
Also in the Box:
- Zipp Tangente titanium black skewer
- Zipp valve extender by Silca
- Zipp individual wheel bag
- Zipp Tangente Platinum Pro Evo brake pads
- Zipp Tangente tube 700c x 20-28mm
- Zipp rim tape 700c x 20mm
Set Weight: 1555g
Max recommended rider weight: 250lbs
Rear Wheel
- Weight: 850g
- Hub Used: Cognition
- Rim Used: X58NSW
- Rim Depth: 58mm
- Brake Track Width (centre): 26.4mm
- Internal Width: 17.25mm
- Spokes: Sapim CX-Ray
- Spoke Count: 24
- Spoke Length Non-Drive: 256mm
- Spoke Pattern Non-Drive: 2 Cross
- Spoke Pattern Drive: 2 Cross
- Spoke Length Drive: 258mm
- Max Tire Pressure: 125psi
- Max Tire Pressure: 8.62bars
- 11-speed compatible hub: Yes
- Track Adaptable: No
- Dimpled Surface: ABLC SawTooth Technology
- Nipples: Sapim secure-lock alloy
- External Nipples: Yes
- XD Compatible: Yes
Occasionally, without notice, manufacturers change product design and/or specifications.
Customer reviews and Q&A's are disabled because you declined functional cookies.
To enable reviews and Q&A's click the 'Cookie Settings' button below and enable functional cookies.
No longer available
Sorry you missed the Zipp 404 NSW Carbon Clincher Rear Road Wheel.
This product is no longer available.