Chris King ISO Disc Rear Q/R Hub

Months of design and testing went into our ISO disc hubset. During the development process, we adapted our machines to use larger bar stock when we make the hub shells. This manufacturing improvement allowed us to increase the spoke flange diameter significantly. A larger spoke flange spreads the spoke holes away from each other. Also, you can use shorter spokes to build a more durable, stiffer and stronger wheel.
Make no mistake, these are not "disposable" parts. There are a lot of super light hubs out there, but will they still be working in 2 years? How about 5? If you ride a lot, 5 years is a lot of panic stops, high speed feathering and braking bumps. Like all of our other hubs, these carry a 5 year warranty. It is easy to make a really light hub, not so easy to make one that you can sell with confidence and back that up for 5 full years. Who else does this but King?
All of our rear hubs utilize our patented RingDrive™ engagement mechanism. RingDrive™ uses 72 engagement teeth on each drive ring. That means the hub engages over 3 times quicker than the standard 24 tooth pawl-type freehub. Trying to get started again in the middle of a steep uphill section? Going for the surprise jump to drop your buddies? This unique design offers instant and positive engagement that's capable of handling a torque load of over 800ft/lbs, or over three times more than most other high end hubs we've tested. It is the heart of our hub and all the rest is built around it.
Other unique features include our ultra stiff 19.5mm constant diameter axle (through the bearings to the dropouts), our time tested and proven bearings, and a 5 year warranty. All of our hubs are easily adjustable and simple to work on, requiring only two hex wrenches and a pen knife for regular maintenance.

Occasionally, without notice, manufacturers change product design and/or specifications.