Crank Brothers Cobalt 3 Lefty 650b / 27.5" MTB Wheelset

Lefty fork compatible xc / race tubeless wheels with ::twinpair spokes. Cobalt 3 wheelset

The new crankbrothers cobalt wheelsets are a perfect mix of strength, performance and stiffness for cross country and trail riding.

Low rotational inertia - by bringing the mass of the wheel towards the hub and away from the rim you experience faster acceleration and deceleration

Twinpair spoke design - triangular design results in a strong wheel. The design looks a bit different from other wheels and will attract attention on the trail

Easy to service - all the spokes in your wheelset are the same length and a spare spoke and nipple is included in the box. The main plus point is you can replace a spoke without having to remove your cassette or even your tire! Imagine not having to reinstall your tubeless tires when you replace a spoke – you can with this wheelset

The wheels are tubeless ready without the need for rim tape with no holes drilled into the rims. The tubeless valve kit is also included in the box ready to install.

• Weight: 1650g
• Warranty: 2 years

Tubeless Rim:

• Material: 6061-T6, smooth weld joint
• Finish: Shot peen, black + red anodizing
• Width (int / ext): 21mm / 24.9mm
• Depth: 19.5mm

Spokes:

• Material: Sapim stainless steel
• Butting: 2.0 / 1.6 / 2.0
• Length: 147mm
• Spoke pins: Hollow 7075-T6 aluminium

Nipples:

• Material: 7075-T6 aluminium
• Size: 3.2x139mm

Hubs:

• Front hub: cobalt, 6061-T6
• Bearings: Sealed cartridge 6804 (x2)
• Front hub end caps: 15mm (installed), 9mm (included)
• Rear hub: cobalt, 6061-T6
• Bearings: Sealed cartridge 6903 (x2), 6902 (x2)
• Rear end caps: 12x142mm (installed), 10x135mm (included)
• Freehub: 3-pawl, 21T, alloy
• XD driver compatible

Occasionally, without notice, manufacturers change product design and/or specifications.