specialized giant cube cannondale felt-bikes shimano endura altura
From £99.99
Save up to 23% RRP: £119.99
Be the first to write a review
Add to Basket
  • Description
  • Reviews (0)
  • Wheels Guide
  • Delivery
  • Returns & Warranty
  • Product description

    Halo Bushed DJD Rear hub

    After a long development period, the DJD hubs have become the DJ Disc Single Speed hub of choice for many pro riders (including Sam Pilgrim). However, not content to sit back, we are introducing an All New DJD hub with a Bushed Driver.

    BD hubs have been utilised successfully in the hardcore BMX market for quite a while, and the advantages of their lighter weight and improved durability over cartridge bearings are pretty well proven, especially when using compact cog sizes. The stresses caused in a Single Speed hub can be huge and, a bush spreads the loads involved over a much larger surface area than ball bearings can achieve, and therefore helps to avoid premature bearing failure.

    In addition to the BD features, we have fitted a lightweight alloy axle with tough, replaceable, M10 Bolt-in Cr-Mo fixings and alloy caps.

    We also know that bolt-in fittings can be tricky if the axle starts to spin when turning the bolt, (as you have nothing to hold) - so we have also added a 6mm Hex broach deep inside the axle just in case the axle starts to spin when you don’t want it to!

    14mm adaptors included: the large surface faces of the cones allow us to also use 10-14mm adaptor washers making this hub suitable for 10mm or 14mm dropouts.

    11T cog fitted as standard. (One piece 9t Driver and 9,10,13,14,16t screw on cogs are also available).
    • Forged and CNC finished body with slotted flanges.

    • Bush Driver with screw-on 11T cog. Hollow Alloy axle with 6mm central hex.

    • Cr-Mo M10 Bolt-in fixings.

    • 14mm adaptors included.

    • Super strong lightweight alloy axle.

    • 2 sealed main body bearings and 1 hardened plastic driver bush.

    • 3 double wide pawls ensure positive drive.

    • Lightweight forged CNC finished alloy hub shell.

    • 11T x 1/8 inch drivers cog fitted standard. (One piece 9t Driver and 10,11,13,14,16t cogs also available).

    • 135mm O.L.D.

    • 32, 36 or 48H drillings available

    • Weight; 449g inc adaptors and bolts.

    • Flange diameter : 58mm

    • Flange C - L : 33mm

    • Flange C - R : 36mmOptions;
      • As Standard: Alloy Internal Female axle system with replaceable M10 bolts to fit 10mm dropouts. 14mm adaptors included to fit 14mm dropouts.

      • 12mm through-axle option - aftermarket upgrade.
  • There are currently no customer reviews

    Write your own review

You may also like...

Halo Supa Drive Freeride Rear Hub Halo Supa Drive Freeride Rear Hub
From £106.99 Save up to £3.00
Halo Spin Doctor 6D Rear Hub Halo Spin Doctor 6D Rear Hub
Now £98.99 Save up to £21.00
DT Swiss 240s Radial 100 mm Front Hub DT Swiss 240s Radial 100 mm Front Hub
From £113.63 Save up to £26.36