Mavic Crossride FTS-X 6B HG 27.5" Wheel

A fantastic upgrade for your mountain bike, the Mavic Crossride FTS-X MTB Wheels will increase the longevity of your ride, while shaving the grams.

This aluminium wheelset has sleeved 27.5” rims, which adds strength, giving a secure connection. The 21mm internal width helps with getting the most out of your tyres, giving support for tyres sidewalls, while also allowing for smaller tyres to be used for training purposes.

The hubs feature Mavic’s FTS-X steels freehub for greater reliability, matched to sealed cartridge bearings, making maintenance easy. The bodies are alloy for weight savings as is the axle in front, with a steel axle in the rear for extra strength. 

Matching up to the hubs are straight pull steel spokes. These add rigidity and strength. The weak point of normal J-bend spokes is removed with the use of straight-pull spokes, allowing for less spokes to be used and keeping the wheels lightweight. There are 24 spokes front and rear with a 2 cross pattern for both wheels.

Key Features:

• For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels don't exceed 120kg, bike included
• Recommended tyre sizes: 35 mm to 69 mm (1.4" to 2.7")
• Weight Front 27.5"895g
• Weight Pair 27.5"1985g
• Weight Rear 27.5"1090g

Rims

• Joint: sleeved
• Drilling: traditional
• Valve hole diameter: 8,5 mm with pop off reducer
• Tyre: tubetype
• Internal width: 21 mm
• ETRTO size 27.5": 584x21C

Spokes

• Material: steel
• Shape: straight pull, round
• Nipples: steel, ABS
• Count: 24 front and rear
• Lacing: front and rear crossed 2

Hubs

• Front and rear bodies: aluminium
• Axle material: front aluminium, rear steel
• Sealed cartridge bearings
• Freewheel: FTS-X steel

Versions

• Colour: Black only
• Disc standard : 6 Bolts only

Compatibility

• Freewheel: Shimano/Sram
• Front axle: convertible from 15mm thru axle to Quick Release with optional adapters

Delivered with

• Rim tape
• User guide

Occasionally, without notice, manufacturers change product design and/or specifications.