Nukeproof Reactor 290 Elite Carbon 29" Mountain Bike 2021 - Trail Full Suspension MTB

Nukeproof Reactor 290 Elite Carbon 29" Mountain Bike 2021 - Trail Full Suspension MTB

Out of Stock Sorry, you missed it. But you still have options...

Recommended alternatives We've found some items that may interest you...

Top Rated

Best Deals

New in Full Suspension MTB

Archive Product Details Comparing? Here's the info from the out of stock item

Product Description

From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.

To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.

Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?

All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.

Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents
Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.

To ensure the bike could climb as well as it descends, we designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.

Occasionally, without notice, manufacturers change product design and/or specifications.

Specification

Frame:Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing
Fork:Fox 36 Float, Performance Elite Series, Grip 2 Damper, 140mm, 44mm Offset, BOOST, Black (SHORT ID: D6GC)
Rear Shock:Fox Float DPX2, Performance Elite Series, 3 Position, LV EVOL, Custom CL, DRL, Rezi A F F tune, 210x50mm, Bearing End, 1x 0.3 spacer fitted. (SHORT ID: D6TB)
Headset:Nukeproof, 44-56 IITS
Stem:Nukeproof Horizon, 50mm, Black
Bars:Nukeproof Horizon V2 25mm Rise, Width - M780mm, L800mm, XL800mm)
Front Brake:Shimano SLX M7120, 4 Pot Brake, Metallic Pads with Fins, Shimano SM-RT66, 203mm
Rear Brake:Shimano SLX M7120, 4 Pot Brake, Metallic Pads with Fins, Shimano SM-RT66, 180mm
Rear Mech:Shimano SLX M7100, SGS 12-Speed, Shadow Plus
Shifters:Shimano SLX M7100-IR, 12-speed Rapidfire Plus, I-Spec EV
Speed:12
Rims:DT Swiss M1900 SPLINE 29"
Front Hub:6 Bolt, 110x15mm
Rear Hub:6 Bolt, Shimano Microspline Driver, 148x12mm
Front Tyre:Maxxis Assegai 29”x2.5 WT 3C MaxxTerra/EXO+/TR
Rear Tyre:Maxxis Dissector 29”x2.4 WT 3C MaxxTerra/EXO+/TR
Seat Post:Brand X Ascend internal w Shimano SL-MT500-IL Remote lever, M:150mm drop; L/XL:170mm drop
Saddle:Nukeproof Horizon SL, Black
Chainset:Shimano SLX M7100 12-Speed, Hollowtech 2, 170mm, 30T, 52mm Chainline
Chain:Shimano SLX M7100 HG 12-speed Inc Quicklink
Cassette:Shimano SLX M7100-12, 12-Speed (HYPERGLIDE+), 10-51T
Pedals:Resin Platform
Weight:14.5Kgs