Park Tool PZT2 Pizza Tool
- ShowProduct Information What more could you want than pizza after a good day of wrenching or riding Park Tool Pizza Tool Fe... read more
- Show Reviews & Q&As
- Show Home & Workshop Tools Guide
- Show Delivery & Guarantee
Product Description
What more could you want than pizza after a good day of wrenching or riding
Park Tool Pizza Tool Features
- An update of one of the all-time greats, the PZT-2 Pizza Tool is bigger (for better hand position), better (super sharp, large diameter stainless steel cutting wheel cuts through even the toughest terrain), and stronger!
- Amaze your friends, show off to your in-laws; a bicycle and also a pizza cutter
Occasionally, without notice, manufacturers change product design and/or specifications.
Home & Workshop Tools Guide
Home & Workshop Tools
Every cyclist needs tools, even if it is just a few Allen keys a chain tool and some tyre levers for general maintenance, it pays to have good quality tools available to you when needed.
The value of high-quality tools is second to none, the best will last you a lifetime and the worst will only give headaches. With so many standards, sizes and types of expensive bike components out there, it makes sense to care for those parts with high-quality dedicated bicycle tools.
Drivetrain tools
Bottom bracket tools
The bottom bracket houses the bearings and sometimes spindle allowing the cranks to spin freely. There are many different types in many different sizes to suit all of the bike and crank combinations available. To remove and fit a new bottom bracket a tool that is specific to that bottom bracket will be needed.
Shop Bottom bracket tools
Cassette and freewheel tools
If the bike uses a screw-on freewheel, there are many different types available, each type needs it's own freewheel removal/install tool for that particular freewheel type. Cassette users will need a cassette tool to fit the lockring. Both freewheel and cassette removal/installation will also require a chain whip to fit/remove.
Shop Cassette and freewheel tools
Chain tools
When fitting a new chain, a chain tool is used to drive the pin out of the link to shorten or remove the old chain. Most modern chains will use a quick-link, to remove these there are dedicated, quick-link pliers. You might also wish to check your chain for wear, there are chain wear indicators that measure the stretch for you.
Shop Chain tools
Crank pullers
Some models of crank and bottom bracket use a type where the spindle is part of the bottom bracket. To remove this crank from the spindle you will need a crank puller. One part threads into the crank arm, then the back part of the tool screws though the front pushing against the spindle to remove the crank. There are a few sizes available, so please measure before purchase.
Shop Crank pullers
Pedal tools
A good quality pedal spanner with a long handle will last a lifetime and is a sound investment. There are also various pedal servicing parts to remove and install the necessary bearings and bushings that keep your pedals spinning freely. For those with workshop experience, there are also pedal thread tapping tools to cut new thread in crank arms.
Shop Pedal tools
Wheel and brake tools
Cone spanners
The hubs on some wheels do not use sealed cartridge bearings, but instead, use traditional cup and cone bearings. To adjust the cone nut a spanner must be used, the spanner needs to be very thin to fit, much thinner than a regular spanner. These dedicated spanners are called cone spanners or cone wrenches.
Shop Cone spanners
Wheel and tyre tools
The humble tyre lever is an essential part of any cyclists toolbox, but they come in many different shapes and sizes. Very tough mountain bike tyres might need a long and sturdy tyre lever to fit, while others are small and can fit in a saddlebag for emergency use. There are also spoke keys and valve tools, along with parts and tools used for wheel building and truing.
Shop Wheel and tyre tools
Brake tools
Disc brakes depend on the rotor being straight and not being too worn to provide a good surface, there are tools to straighten the rotor and check for wear. There are also tools for the maintenance of brake levers and callipers. If using hydraulic brakes then the hose will need to be cut with a dedicated hose cutter.
Shop Brake tools
Workshop tools
Alignment tools
For workshops or capable home mechanics, there is a range of alignment tools used to make sure the frame and fork of a bike are running straight and true. These specialised and dedicated tools are highly accurate and are vital to the job, allowing the bike to function as intended.
Shop Alignment tools
Facing tools
Certain areas of a raw bicycle frame can come out of manufacture or painting with slightly less than perfect internal diameters. Areas like the head tube and bottom bracket shell need to be perfectly circular to give the bearings and cups a perfect interface. This process is known as facing, there is a range of facing tools available for different sizes and applications.
Shop Facing tools
Headset and fork tools
When fitting new forks for a threadless headset, the steerer will need to be cut, a crown race fitted and a star nut inserted, there are dedicated tools for each of these jobs. There are dedicated tools for other types of fork and headset. There are also tools for headset maintenance, fitting and removal of cups and bearings, covering all the sizes and types available.
Shop Headset and fork tools
Home mechanics
Allen keys
Allen keys are an essential tool for cyclists. Often the majority of maintenance and adjustment can be made with only Allen keys and a T25 Torx key. There are short sets available, or larger T-handle sets for working at home. As with any tool, it pays to get high quality. Maintenance is easier with high-quality tools, and for one that is used so often, you should treat yourself with good Allen keys and Torx keys.
Shop Allen keys
Cable cutters
When cutting brake or gear cables it is essential to get a clean cut first time, every time. If the cut is bad, or a second attempt is needed then the end will fray often meaning a ferrule cannot be added and in time the cable will unravel. With a good pair of snips, the ferrule can be added and the cable will last longer before needing to be replaced.
Shop Cable cutters
Screwdrivers
Just like Allen keys, Torx keys and cable cutters, a good quality screwdriver set will mean fewer headaches in the long run. A range of different sizes for both Phillips and flathead types will fit the screw precisely and mean less rounded heads. Using the right tool for the job is as important as having the right tool in the first place.
Shop Screwdrivers
Spanners
A good range of tight-fitting, high-quality spanners is an evergreen part of any good toolbox. A well-fitting spanner will mean less rounded bolts and happier home maintenance. Adjustable spanners are also available for those one-off jobs.
Shop Spanners
Tool kits
Some of the big brands in the world of bike tooling now produce a toolbox packed with all of the essential high-quality tools needed for good maintenance. A bicycle tool kit is the best choice if you do not have any tools already, enabling you to work on your bike with the right tool for the job.
Shop Tool kits
Torque wrenches
There are many parts of a bicycle where the bolt must be tightened to a specific value. This value is measured in Newton-Meters and is a measurement of torque. These torque settings are both safety and functionally critical. To tighten a bolt to the required torque a torque wrench is needed. Once set to the value required, it will click to indicate not to tighten any further.
Shop Torque wrenches
Workstands
While not completely essential, all work done on a bike is much easier with a work stand. Elevating the bike to a comfortable secure position means you can work better and more efficiently on your bike. Giving access to both sides and being able to spin through the gears easily makes every job easier, faster and more accurate.
Shop Workstands
Delivery & Guarantee
UK Delivery Information
International Deliveries – Temporarily Suspended 11/11/20
Note: We are still offering deliveries to the Isle of Man, Scottish Highlands, Scottish Islands, Channel Islands, Isle of Wight, Jersey and Guernsey. We are no longer delivering to Northern Ireland.
Courier Delivery update: Due to the COVID19 situation, we are currently experiencing some delays with deliveries. Our couriers are working around the clock to get your order to you as soon as possible but there is a potential delay of up to 48 hours . Please check your tracking on track your order here.
Please download the TNT Track and Trace App for iOS here and Android here so you can keep an eye on your delivery and any further updates.
Please note on the TNT tracking app it may show your delivery status as ‘Collecting’ (as per image below). This means your delivery has left our warehouse and is currently held at TNT main depot and there could be up to a 48 hour delay.
Please keep checking the TNT tracking for further updates. On behalf of TNT we apologise for any delay and inconvenience this may cause.
We are committed to offering fast and free delivery, whether you're ordering bikes, accessories or clothing. Our standard delivery service is FREE in the UK, regardless of the size and on all orders over £20.
Please note that bulky products and bikes shipped to outlying UK regions are excluded from free shipping.
Please note that Pre-Order dates can sometimes change due to updated stock information.
Click here for more UK and international delivery information.
Returns & Warranty
It's easy to return a product with our 365 day, hassle free returns.
We will give you a full refund or exchange on any item that is returned to us unused/unfitted, in a resaleable condition and in its original packaging (where possible).
Please note: For hygiene reasons, we cannot accept returns of facemasks, undershorts or underwear if the item has been removed/unsealed from its original packaging.
If your item develops a fault or arrives damaged, please contact us first so we can resolve the issue for you as quickly as possible.
For more information please visit our Returns & Warranty page.
