Peatys Tubeless Conversion Kit - MK 1
Peaty’s Tubeless Conversion Kit includes everything you need to run a fully optimised tubeless setup – Peaty’s RimJob Rim Tape, Tubeless Valves and Sealant. If you value more time spent on the bike and less time fixing punctures, this is the perfect set up.
Bringing together legendary downhill racer Steve Peat’s line of top-tier tubeless set up products, this conversion kit is the product of several years of meticulous research, testing and refinement by a dedicated team of expert mechanics, scientists and pro-racers. As used by some of the very best racing teams such as Santa Cruz Syndicate, Hope Factory Racing and Canyon Eisburg.
These conversion kits are available in a variety of configurations, so that you can ride with the perfect tubeless set up whatever your discipline: road, cyclocross, XC, enduro, downhill – all good to go. Every conversion kit features a handy installation guide on the box, with QR links to further help and guidance from Peaty’s website for each stage of installation – rest assured that the installation process will be slick and swift.
Peaty’s RimJob Rim Tape is a super high-tensile strength tape, primed with a bespoke adhesive which ensures maximal bonding. It has a tried and tested degree of stretch and the large, rigid recyclable core allows the tape to be pulled and applied with tension, contouring your rim tightly for the best fit. The semi-transparent finish makes locating the valve hole quick and efficient.
Peaty’s Tubeless Sealant is non-toxic, non-hazardous and completely biodegradable – utilising innovative nano-platelet technology, derived from starch extracted from sustainably managed Eucalyptus trees.
Peaty’s Tubeless Valves are machined from lightweight anodised aluminium. What makes them a leap above the rest is the integrated valve core remover cap, which makes valve removal and sealant top up a quick and efficient process, whether in the workshop or on a ride.
If you’re looking for the very best tubeless set up on your bike, then Peaty’s is simply unequalled in lasting performance and ease of installation.
Disciplines:
- Road/Cyclocross – 21mm tape/60mm valves
- XC/Urban – 25mm tape/40mm valves
- DH/Enduro – 30mm tape/40mm valves
- DH Wide – 35mm tape/40mm valves
What's included?
- Two tubeless valves
- A nine metre roll of rim tape
- 2 x 120ml tubeless sealant pouches (1 x 120ml for the road option)
Occasionally, without notice, manufacturers change product design and/or specifications.
Tubeless Sealant and Accessories Guide
Riding with tubeless tyres means that you’ll spend less time fixing flats and more time shredding the trails or lighting up the open road. In this tubeless guide we’ll look at all the things you need to get your wheels and tyres rolling without inner tubes.
Tubeless Sealant
Sealing all the little air gaps in your tyres, whether through a puncture or a less-than-perfect tyre/rim seal, tubeless sealant is an essential for every cyclist who wants to ride without tubes. There are a few different options to choose from, but they all work on the same principle: a liquid that solidifies when it leaks out of the tyre to seal gaps and punctures.
While simple latex-based liquids will work as sealants most brands sealants use special formulas and additives to improve longevity and sealing performance. Sealants with particles added are better at sealing larger holes so are ideally suited to mountain bike tyres. Lighter weight sealants are good for road bikes as puncture holes are generally smaller and easier to heal. Some sealants don’t work well with CO2, so check for compatibility if you plan on using a CO2 inflator to seat your tyre.
How much sealant should I use?
The amount of sealant you need to use will depend on the volume of the tyre. Brands will recommend specific amounts for their sealants which will be about 30 – 60ml for road bike tyres and 70 – 150ml for MTB tyres.
The table opposite shows typical sealant quantity recommendations to use as a starting point. If your tyres are a little porous some sealant may leak out. Don’t worry about this, it’s just the sealant doing its job, but you may need to top up with a little extra to be sure that there is enough left to seal any punctures.
|
Tyre size |
Sealant quantity |
|
27.5 x 2.0 |
75ml |
|
27.5 x 2.4 |
110ml |
|
29 x 2.0 |
90ml |
|
29 x 2.4 |
130ml |
|
700 x 25 |
30ml |
|
700 x 32 |
50ml |
Tubeless Sealant Accessories
Tubeless Rim Tape
If your wheel doesn’t have tubeless ready rim tape installed, then you will need to tape the rim with tubeless compatible tape. Tape is available in different widths and you’ll need a size that best matches the internal width of your rim.
Tubeless Valves
As there is no inner tube the valve attaches directly to the rim of a tubeless wheel. These are usually Presta valves. Make sure that you get ones that are long enough to easily go through the rim of your bike. Longer valves are available for deep section rims. The valve cores tend to block up with sealant after a while so they will need taking out and cleaning and/or replacing from time to time.
Tubeless Conversion Kits
Tubeless conversion kits contain sealant, tape and valves as well as fitting instructions, so these are the best option when converting your wheels for the first time. When buying a conversion kit make sure that you get one with the correct tape width and valve length to fit your wheel.
Sealant Injector
You can pour sealant into the tyre before you finish putting the tyre on, but many people prefer to inject the sealant through the valve. You can use a normal syringe, but specific injectors usually include a valve adaptor that makes the job easier. Some Tubeless Kits include an injector.
Tubeless Tyre Repair Kits
While sealant will heal smaller punctures by itself a larger hole or tear in the tyre will need to be plugged or patched. Tubeless plug systems offer long lasting repairs and are very quick and easy to use even at the road or trail side. If you don’t want to have a small bit of the rubber bung showing through your tyre, then you will need to take the tyre off and patch it from the inside.
Tyre Inserts
Foam tyre inserts cushion the blows from rock strikes, especially when running low tyre pressures. They are a great way to protect your MTB tyre and rim when riding through rough terrain. Inserts can also help to keep the tyre on the rim more securely to avoid burping air when cornering.
Tubeless Inflators
When you fit a new tubeless tyre, it can sometimes be difficult to get the tyre seated properly on the rim. This is because a normal track pump doesn’t blow the air out quick enough to overcome the initial gaps between tyre and rim. Tubeless inflators allow you to blast a shot of air directly into the tyre to pop it onto the rim.
Tubeless inflators like the original Air Shot need to be pumped up with a separate track pump whereas others combine both track pump and inflator tank. See our range of tubeless inflators
How to Convert to Tubeless
While tubeless systems will save you time in the long run, they do take a little more care to set up.
See our Tubeless Tyre Conversion Guide for more.
Customer reviews and Q&A's are disabled because you declined functional cookies.
To enable reviews and Q&A's click the 'Cookie Settings' button below and enable functional cookies.
No longer available
Sorry you missed the Peatys Tubeless Conversion Kit - MK 1.
This product is no longer available.