Thomson Elite Seatpost

The Thomson Elite seatpost is perfect for a wide range of bikes and riders. It consists of forged clamps, an integrally machined head, and an elliptically extruded 7000 series aluminum body. The 16mm setback option helps provide a precise fit.

The clamp, head, and upper tube are strong enough to withstand 350 foot-lbs of torque, although the tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails

• Over 40% stronger on ultimate strength test than the strongest production seatposts on the market.
  
  
• The Thomson seatpost has a clamp, head, and upper tube strong enough to withstand 350 foot-lbs of torque
  
  
• The Thomson seatpost has all parts captive and can easily be attached to a seat without disassembly
  
  
• Very low profile clamps - no seat interference - swivel nuts are down between the seat rails
  
  
• Adjustments can be made to the tilt of the seat without moving the seat forwards or backwards.
  
  
• Easy on seats - allows seat to survive heavy impact loads without bending rails