Wheels Manufacturing 6002, 6802, and 6902 Sealed Bearing Extractor

Wheels Manufacturing 6002, 6802, and 6902 Sealed Bearing Extractor

Out of Stock Sorry, you missed it. But you still have options...

Recommended alternatives We've found some items that may interest you...

Top Rated

Best Deals

New in Bottom bracket tools

Archive Product Details Comparing? Here's the info from the out of stock item

Product Description

Genuine Wheels Manufacturing spare or a great tool on it's own

To remove sealed bearings you will need the correct size extractor, 8mm & 10mm wrenches (for small sized extractors) or 13mm and 1-ö wrenches (for large sized extractors), hammer and punch

The correct size extractor will fit snugly into the inner diameter (I.D.) of the sealed bearing you wish to extract

Place extractor into I.D. of sealed bearing until it seats flush with the shoulder of the extractor

Tighten nut with wrench while securing extractor with other wrench. Tighten nut until the extractor is firmly in place within the I. D. of the sealed bearing

Once the extractor is secured, align a punch with back side of the extractor

Gently tap on the punch until bearing is removed along with the extractor

The bearing is now removed. Install new sealed bearings with a Wheels Mfg PRESS-1 (rear hub & bb-Æs) or PRESS-2 (front hub)

Occasionally, without notice, manufacturers change product design and/or specifications.