The Yeti LT T-Series X0 AXS 29 Factory pairs a TURQ carbon frame with Sixfinity suspension and a 170mm Fox 38 Factory fork. X0 AXS shifting, carbon DT Swiss wheels and adjustable geometry create a high-spec build for demanding enduro riding.

Key Features:

• TURQ Series carbon frame with Sixfinity suspension and adjustable geometry
• Fox 38 Factory GRIP X2 fork with 170mm travel
• Fox Float X2 Factory shock controls the Sixfinity rear suspension
• SRAM X0 AXS electronic 1x12 drivetrain with 10-52T cassette
• SRAM Maven Silver hydraulic disc brakes with 200mm HS2 rotors
• 29in DT Swiss EXC 1700 carbon wheels with 2.5in Schwalbe tyres
• Flip-chip system allows 29in or MX wheel setups while maintaining geometry
• Available with 0% APR finance

The Yeti LT T-Series X0 AXS 29 Factory is a long-travel enduro bike built around Yeti's TURQ Series carbon frame and Sixfinity suspension platform. Supplied with 29in wheels, it combines a gravity-focused suspension setup with adjustable geometry and a high-spec component package for technical trail and enduro riding.

The LT is available exclusively with Yeti's top-tier TURQ Series carbon construction. Yeti uses an optimised arrangement of high-performance carbon plies to balance strength and stiffness, along with Vectran liquid-crystal-polymer multifilament yarn to increase impact strength. The carbon layup is also designed with a degree of flex to help reduce trail vibration reaching the rider.

Sixfinity sits at the heart of the LT's suspension design. The six-bar system allows Yeti to carefully control suspension characteristics throughout the travel, with the platform developed to balance traction, pedalling behaviour and support for its intended enduro use.

A Fox 38 Factory fork provides 170mm of front travel and uses the GRIP X2 damper. Its combination of a substantial 38mm chassis and adjustable damper is well suited to the LT's long-travel intentions, giving riders scope to fine-tune the fork for different terrain and preferences.

At the rear, a Fox Float X2 Factory shock controls the Sixfinity suspension. The supplied specification doesn't state the LT's rear-wheel travel, so I've avoided adding a figure that isn't supported by the information provided.

Although this build comes with 29in wheels, the LT frame can also be configured as a mixed-wheel bike. A flip chip allows riders to switch between dual-29 and MX configurations while maintaining the intended geometry, making it possible to alter the wheel setup without fundamentally changing the bike's handling position.

A second adjustment provides further geometry tuning. When configured with mixed wheels, Yeti states that riders can slacken the geometry by an additional 0.5 degrees and lower the bottom bracket by 6mm. This gives riders another way to tailor the bike to their terrain and preferred handling characteristics.

Yeti also uses size-specific chainstay lengths across the LT range. Adjusting the rear-centre dimensions according to frame size is intended to maintain a more consistent balance between the front and rear of the bike for riders of different heights.

SRAM X0 AXS provides wireless electronic 1x12-speed shifting. An X0 AXS rear derailleur is controlled through SRAM's AXS Pod, while the wide-range X0 10-52T cassette provides low gearing for steep climbs alongside closely spaced options further through the range.

The drivetrain is completed by a SRAM X0 chain and X0 crankset with short 165mm crank arms and a 30T chainring. The 165mm cranks also provide useful ground clearance when pedalling through rough and technical terrain.

SRAM Maven Silver hydraulic disc brakes handle stopping duties, with 200mm HS2 rotors specified front and rear. The Maven platform is designed around powerful, controlled braking for demanding mountain bike riding, complementing the LT's enduro-focused suspension and tyres.

DT Swiss EXC 1700 EVO DEG DF carbon wheels are a standout part of this build. The 29in wheels use 30mm-wide carbon rims, providing a suitable platform for the high-volume 2.5in tyres and helping keep the wheel package responsive while retaining a gravity-focused setup.

A 2.5in Schwalbe Magic Mary Trail Pro is fitted at the front, combining Radial construction with an Ultra Soft compound to prioritise front-wheel grip. At the rear, a 2.5in Schwalbe Albert Gravity Pro uses Radial construction and a Soft compound.

A Fox Transfer Performance dropper post provides travel matched to frame size. Small frames receive 150mm, Medium gets 180mm, while Large and XL bikes are specified with 210mm travel for the European build. This helps provide useful saddle clearance while keeping the post appropriately sized for different riders.

The cockpit combines Yeti's 780mm-wide carbon handlebar with 35mm rise and a Burgtec Enduro MK4 stem measuring 42.5mm long. A WTB Solano saddle with chromoly rails completes the contact points.

Practical details include internally tunnelled cable routing, a threaded SRAM DUB BSA 73 bottom bracket and sealed Enduro Max pivot bearings. A 12x148mm Boost rear axle and Universal Derailleur Hanger provide widely used standards for wheel and derailleur mounting.

Overall, the Yeti LT T-Series X0 AXS 29 Factory combines Yeti's adjustable TURQ carbon and Sixfinity platform with a 170mm Fox Factory fork, electronic X0 AXS drivetrain and carbon DT Swiss wheels. It's a high-spec option for riders looking to tackle technical trails, enduro stages and sustained descents while retaining the ability to fine-tune the bike's setup.

Occasionally, without notice, manufacturers change product design and/or specifications.