specialized giant cube cannondale Mavic Castelli endura altura
From £25.24
Save up to 28% RRP: £34.99
9 reviews
Select a size
Select a colour
Add to Basket
  • Description
  • Reviews (9)
  • Mudguard Guide
  • Delivery
  • Returns & Warranty
  • Product description

    Tortec Reflector full length mudguards are the perfect choice for busy commutes. Made from extremely durable Chromo-Tec (plastic and aluminium laminate) these fenders will last daily exposure to the elements, and won’t chip or crack with the impact of small stones. The Reflector mudguards are full length to give you the most protection from possible from debris.

    Both front and rear mudguards have reflective strips running down each side for better side-on visibility. That visibility is especially useful at junctions and cross-roads in low light conditions. A rear reflector on the back fender also helps improve your visibility to drivers behind you.

    Key Features

    • Stainless steel fittings and stays
    • A rear reflector
    • Pop-off front stays
    • Front mud-flap
    • Reflective stripes
    • Available in Black or Silver
    • A range of 26" and 700c sizes

    Note: Tortec Reflector Mudguards not designed for use with suspension forks


  • Tortec Reflector Full Length - Mudguard Set Reviews

    Write your own review
    Overall Rating:
    4.4
    out of 5
    4.35
    Build Quality
    4.22
    Performance
    4
    Value For Money
    4.33

    Customer Reviews (9)

    2
    Overly complicated

    It really shouldn't be this complicated to fit a pair of mudguards. You have to pre-fit them, measure them up, and fit them again. Because the angle of the stays are way off form the holes on the guards, you have to flex the stays quite a bit to fit them, this can make things fiddly. Oh, you will need some way to cut the stays, the instructions suggest a hacksaw. (used bolt cutters, which i had to buy). Because of the return policy, at least i can say i am now a proud owner of a pair of bolt cutters. Requires plenty of patience; I'm sure they'll do the job, now fitted, but i would not buy again.

    It really shouldn't be this complicated to fit a pair of mudguards. You have to pre-fit them, measure them up, and fit them again. Because the angle of the stays are way off form the holes on the guards, you have to flex the stays quite a bit to fit them, this can make things fiddly. Oh, you will need some way to cut the stays, the instructions suggest a hacksaw. (used bolt cutters, which i had to buy). Because of the return policy, at least i can say i am now a proud owner of a pair of bolt cutters. Requires plenty of patience; I'm sure they'll do the job, now fitted, but i would not buy again.

    Close review
    2.2 out of 5
    Build Quality: 1.5/5
    Performance: 3.5/5
    Value For Money: 1.5/5
    3
    Great if you are a mind reader

    I haven't actually managed to get these bad boys fitted to my bike yet. This is mainly because the instructions assume that you are a mind reader. Fortunately I'm going to a Derren Brown event this weekend and I'm confident that he'll be able to fit them for me.

    I haven't actually managed to get these bad boys fitted to my bike yet. This is mainly because the instructions assume that you are a mind reader. Fortunately I'm going to a Derren Brown event this weekend and I'm confident that he'll be able to fit them for me.

    Close review
    3 out of 5
    Build Quality: 2.5/5
    Performance: 3/5
    Value For Money: 3.5/5
    5
    Good 'gaurds.

    Got these for new hybrid with disc brakes. Have them already on another bike, so know they do what they're supposed to. Red relector keeps you legal in the dark, reflective side bits an added bonus. Bit of jiggery-pokery required to bend the front stays around the brake caliper, but otherwise an easy fit. Tip for cutting the stays to length, use a small pair of bolt croppers, so much easier than a hacksaw.

    Got these for new hybrid with disc brakes. Have them already on another bike, so know they do what they're supposed to. Red relector keeps you legal in the dark, reflective side bits an added bonus. Bit of jiggery-pokery required to bend the front stays around the brake caliper, but otherwise an easy fit. Tip for cutting the stays to length, use a small pair of bolt croppers, so much easier than a hacksaw.

    Close review
    5 out of 5
    Build Quality: 5/5
    Performance: 5/5
    Value For Money: 5/5
    5
    take your time

    Great mudguards they end up really solid and rattle free when fitted. Fitting them though is a bit of a chore; here is what worked for me. fitted the frame bolts with a little wiggle room. fitted the stays to the guards without the black covers. bolted stays to frame. refitted wheel and lined up the guard. marked the stays for cutting. used a good hacksaw and cut the stays. refitted the stays with the black covers this time. tightened up all the stay bolts. removed the rear wheel and checked the frame bolts. remember to check for position of your stay eyelets on the front forks and where the disc brake caliper is. I made a little bracket to go under the top caliper mounting bolt; you may be able to use a 'P' clip or bend the stays.

    Great mudguards they end up really solid and rattle free when fitted. Fitting them though is a bit of a chore; here is what worked for me. fitted the frame bolts with a little wiggle room. fitted the stays to the guards without the black covers. bolted stays to frame. refitted wheel and lined up the guard. marked the stays for cutting. used a good hacksaw and cut the stays. refitted the stays with the black covers this time. tightened up all the stay bolts. removed the rear wheel and checked the frame bolts. remember to check for position of your stay eyelets on the front forks and where the disc brake caliper is. I made a little bracket to go under the top caliper mounting bolt; you may be able to use a 'P' clip or bend the stays.

    Close review
    5 out of 5
    Build Quality: 5/5
    Performance: 5/5
    Value For Money: 5/5
    4
    Mudguards good but Yodel delivery rubbish

    Mudguards are a bit fiddly to fix but take your time. I would say thet are better than SKS as they have covers for support ends and hopefully wont break as easily.... On the negative side YODEL delivery is a joke, to cut a long story short I would never use them again!

    Mudguards are a bit fiddly to fix but take your time. I would say thet are better than SKS as they have covers for support ends and hopefully wont break as easily.... On the negative side YODEL delivery is a joke, to cut a long story short I would never use them again!

    Close review
    4 out of 5
    Build Quality: 4/5
    Performance: 4/5
    Value For Money: 4/5
    5
    Tortec reflective full length mudguards

    Excellent mudguards at a bargain price from Tredz. Fitting took an hour as cutting to length is needed ( a vice and metal saw helps) but the result is a superb looking, solid, safe and highly durable product. Highly recommended.

    Excellent mudguards at a bargain price from Tredz. Fitting took an hour as cutting to length is needed ( a vice and metal saw helps) but the result is a superb looking, solid, safe and highly durable product. Highly recommended.

    Close review
    5 out of 5
    Build Quality: 5/5
    Performance: 5/5
    Value For Money: 5/5
    5
    Excellent mudguards, very reflective

    These mudguards arent any harder to fit than any others; stays need bending and cutting to individual bikes, but thats the nature of these things. Ive had about 4 sets on various bikes over recent years, I keep using them as for a comuter or touring bike, the reflective strip adds another level of 'free' safety. I often supplement this with reflective tape on the frame. They always take me a little while to fit, but then Im a perfectionist re: cutting and bending the stays, and getting a nice even curved gap over the tyre. Especially important at the front, where big feet and a medium size frame normally lead to toe overlap. An excellent product.

    These mudguards arent any harder to fit than any others; stays need bending and cutting to individual bikes, but thats the nature of these things. Ive had about 4 sets on various bikes over recent years, I keep using them as for a comuter or touring bike, the reflective strip adds another level of 'free' safety. I often supplement this with reflective tape on the frame. They always take me a little while to fit, but then Im a perfectionist re: cutting and bending the stays, and getting a nice even curved gap over the tyre. Especially important at the front, where big feet and a medium size frame normally lead to toe overlap. An excellent product.

    Close review
    5 out of 5
    Build Quality: 5/5
    Performance: 5/5
    Value For Money: 5/5
    5
    Quality Guards

    Fantastic quality mudguards as you would expect at this price point. Fitted to Boardman MX Comp (700 x 37c). Rear guard straightforward, fits well and looks good. Front guard needed modification as frame has no eyelets on front forks to receive stays - my mistake! Long ride today over wet ground - mudguards performed impeccably. Would recommend, just make extra sure they are compatible with your bike.

    Fantastic quality mudguards as you would expect at this price point. Fitted to Boardman MX Comp (700 x 37c). Rear guard straightforward, fits well and looks good. Front guard needed modification as frame has no eyelets on front forks to receive stays - my mistake! Long ride today over wet ground - mudguards performed impeccably. Would recommend, just make extra sure they are compatible with your bike.

    Close review
    5 out of 5
    Build Quality: 5/5
    Performance: 5/5
    Value For Money: 5/5
    5
    Tortec reflector mudguards

    When they arrived after reading the instructions I thought so much to go wrong.... Having fitted them in 30 mins and made minor adjustments whilst testing which are easy to adjust if you change wheels or tyre widths my thoughts were of what value and style they add to my winter rides....the reflectors will add to the safety. They are surprisingly sturdy. Very pleased with the quality of my purchase.

    When they arrived after reading the instructions I thought so much to go wrong.... Having fitted them in 30 mins and made minor adjustments whilst testing which are easy to adjust if you change wheels or tyre widths my thoughts were of what value and style they add to my winter rides....the reflectors will add to the safety. They are surprisingly sturdy. Very pleased with the quality of my purchase.

    Close review
    5 out of 5
    Build Quality: 5/5
    Performance: 5/5
    Value For Money: 5/5